Lifting, safety

Overload control with load pin

Measuring loads or controlling overloads on lifting equipment frequently requires the use of expensive equipment difficult to install.
The load pin provides an excellent solution that limits these modifications, because it consists simply of replacing by an instrumented load pin:
    • an attachment pin
    • a pulley shaft
    • a lifting device

SCAIME load pins are used in load control for: M16

cranes, pulley blocks, elevators, conveyors, winches, traveling cranes, vehicle structures, carriages and any other type of lifting equipment.
They can be used in severe environmental conditions such as tropical environments, marine or port installations.


MTRD	Force sensor, cranes or lifting equipements	50, 100, 200, 300, 500 kN	±0.15 %
MTRS	Force sensor, cranes and lifting equipements IP68	50, 100, 200, 300, 500 kN	±0.15 %
M15	load pin, force sensor	0.2, 0.5, 1, 2 kN	±0.5%
M16	Load pin, force sensor	5, 10, 20, 40, 50, 100, 200, 400, 600, 800, 1 000 kN	± 0.5%
CPJ / CPJ2S	Strain gage conditioner	outputs ±10 V, 0-10 V, 4-20 mA	±0.05 %
IPE50 Panel	Front panel weighing indicator	LED 18 mm display	10 000 d, OIML R76
PAX S	Programmable indicator	20 meas.s.	0.02 %
Calibration N	Force calibration	5 N to 1 000 KN in tension-compression	< ±0.1%